Wireless Inductive Switch-Product-佛山久夜家居智能照明有限公司

Features: 1. Super standby, use time 2. Simple pairing 3. Exquisite appearance 4. Easy installation Pairing: 1. 8 Double-click the button at the receiving end, the blue light flashes, entering the pairing state, and the pairing state is closed after seconds without the pairing signal; 2. The transmitter is switched on in 1.5 seconds, the blue light is on, and then press the next code to pair, and the light bar flashes 2 times for successful pairing.

JY-A02

Features: 1. Super standby, use time 2. Simple pairing 3. Exquisite appearance 4. Easy installation Pairing: 1. Double-click the button at the receiving end, the blue light flashes, entering the pairing state, and closing the pairing state after 8 seconds without the pairing signal; 2. The transmitting end is switched on by 1.5 seconds, the blue light is on, and then press the next code to pair, and the light bar flashes 2 seconds after the pairing is successful.

JY-A03

Features: 1. Super standby, use time 2. Simple pairing 3. Exquisite appearance 4. Easy installation Pairing: 1. Double-click the button at the receiving end, the blue light flashes, entering the pairing state, and closing the pairing state after 8 seconds without the pairing signal; 2. The transmitting end is switched on by 1.5 seconds, the blue light is on, and then press the next code to pair, and the light bar flashes 2 seconds after the pairing is successful.

JY-A04

Features: 1. Super standby, use time 2. Simple pairing 3. Exquisite appearance 4. Easy installation Pairing: 1. Double-click the button at the receiving end, the blue light flashes, entering the pairing state, and closing the pairing state after 8 seconds without the pairing signal; 2. The transmitting end is switched on by 1.5 seconds, the blue light is on, and then press the next code to pair, and the light bar flashes 2 seconds after the pairing is successful.

Y2213

1. Lithium battery 3.7V power supply, shutdown current 6uA, standby current 10-800uA working current (code sending moment) 4-15mA: 2. Press K1 for 1.5 seconds to turn on/off; 3. Wave the light on/off once, and stop in front of the sensor to dim when the light is on, 4. Sensing distance 5CM

Y2214

1、锂电池3.7V供电,关机电流16uA,待机电流16uA,⼯作电流(发码瞬间)4-15mA之间 2、⻓按1.5秒K1开机/关机 3、PIR⼈体感应传感器.感应有⼈开灯,⼈⾛延时30秒关灯 4、感应有效距离1-8⽶,环境温度会影响距离,温度越⾼灵敏度越低

Y2215

1. Lithium battery 3.7V power supply, shutdown current 9uA, standby current 9uA, working current (code sending moment) between 4-15mA: 2. Long press K1 for 1.5 seconds to turn on/off 3. Two touch keys: A touch key short touch on/off light, long touch dimming function, B touch key three-gear dimming 30% 60% 100%